Good times!

Well today has been a great day. I honestly think I broke the back of it today, and feel that all the big things have now been tackled.

It was a good omen when I got outside and the morning sun was streaming down the side of the house...



Chris told me he hated the original rubber mounts for the bars, and with the big high bars, they would just make it worse, so I cracked on with turning up some new ones....



I didn't spend too much time tidying the bottoms, and need some new tips to clean the top surface, but they'll work nicely!



Just awaiting new nuts to arrive for the bottoms now...



next up - rear mudguard.

Ive been avoiding doing this - no idea why - probably cos I havent done it before, but it was time to get it done!

Got one of the laser cut tabs in the vice, and cracked the oxy acetylene-kit out for some fun!



heres a before and after kinda shot....



Man - I Love my Oxy-Acetylene kit!

pushed the wheel right up against the back of the sliders, and put the parts in place.



cleaned the paint off, and welded it in place.



I now know its not quite straight as the bike was leaned to the side slightly - but I'm not gonna loose any sleep over it!

Then used top mounts to sort the top of it out. I would be lying that it didn't take me ages to sort this out. I guess it would be much easier to do with 2 of you there, rather than trying to stuff things behind the tyre and hold the sissy bar forward, and TIG weld...





Happy boy!

I had to move the P-Pad further up the muddy, as it was closer to the seat than I was comfortable with.

With the oxy Acetylene torch still out I bent the Z into the rear brake arm...





Well that was all I was planning for the day - but as this was just past midday, thought I had better crack on some more. The final job I had been avoiding was the foot controls. A real pain as it was all getting a bit tight with the exhaust / engine and the kick pedal.

I took a few pics and consulted with the great guru Toddy (this was the second call of the day to him, as i bugged him about the muddy mounts)..



we dicussed a few options, but agreed that using a strong piece of angle iron I could weld some nuts to the back, and then weld onto the frame, while drilling the nuts into the frame rails. This was the best option as it needed to be right over the join for the hardtail - this way there was more strength being put into the frame.



I didnt take too many pics, but here it is all tacked on. When its all together and I strip the frame i'll seam weld around the box section, and probably trim the bottom somewhat...







the moment of truth - will the pipes fit on???



yup, its a snug fit, but fit a treat!

With the dome headed nuts sitting another 4-5mm proud of the bracket it has swung the back out slightly - but nothing to be really worried about....


So that concludes today's efforts class. I've even managed to get in, showered and sort dinner (with a glass of red) by 5pm!

what a great day!